+
  • o26.jpg

Air compressor online cleaning agent (oil agent)

It is directly added to the new oil and runs for 3000-4000 hours at the same time as the new oil. When the oil is changed, the head is as bright as new, and the addition amount is 10%-20%.

Hotline:

17808881111

hiddenValue

Details Introduction

Application (1) Prevention
◎ Add it directly into the new oil and run it for 3000-4000 hours at the same time as the new oil. When the oil is changed, the head is as bright as new, and the addition amount is 10%-20%.

Application (2) Emergency type
◎ Diluted in the fluid in the system that needs to be cleaned;
◎ Only applicable to cleaning operation;
◎ Add 20:1 to the loop before oil change, just 20L of oil and a bottle of cleaning agent. And circulate for at least 24-48 hours, while maintaining the loop at the usual temperature conditions, shut down while it is hot to replace the oil;
◎ After cleaning, the filter needs to be changed before changing the new oil:
◎ Note: It is easy to block the oil drain port due to a lot of grease and sludge that are often cleaned and used oil is discharged. Therefore, when the machine is shut down for pressure relief, a pressure of 1-2kg should be retained to make it easier to discharge old oil and oil stains.

Main technical parameters

Note: can be mixed with any mineral oil mixed with other oil or for safety information please consult the dealer
Packing: Hoffman 1L iron can, 18L plastic barrel, 200L iron barrel.

Key words:

Product inquiry

Note: Please leave your phone number or E-mail and our professionals will contact you as soon as possible!